Driver Installation - EUROCOM D900T PHANTOM User Manual

Drivers & Utilities

Driver Installation

Insert the Device Drivers & Utilities + User's Man-
ual CD-ROM and the Notebook Driver Installa-
tion application will run automatically. If you want
to install the driver manually see
Installation" on page 5 -
5
1. Check the driver installation order from
1, on page 5 - 7
in this order) which is the same as that listed in
the application menu.
2. Double-click to select the name of the driver you
wish to install.
3. Follow the instructions as listed in this chapter.
4. Make a note of the drivers you have installed.
5. If the computer needs to restart after installing a
driver, and you will usually need to click the
"Yes/Finish" button when prompted to restart
the computer.
6. To get back to the Driver Installation screen click
Start (menu) > Run... and navigate (Browse..)
to D:\SETUP.EXE and click OK.
OR
5 - 6 Driver Installation
"Manual Driver
7.
Table 5 -
(the drivers must be installed
Double-click the My Computer icon (for WinXP
only), and then double-click the CD icon.
Figure 5 - 2
Drivers Installer
Note: The installation procedure for installing the
Audio and Modem drivers will differ according to
your operating system (see page 5 - 9).