Video & Audio Controls
Disk Eject Warning
3
Don't try to eject a CD/
DVD while the system
is accessing it. This
may cause the system
to "crash". Stop the
disk first then eject it,
or press the stop but-
ton twice.
3 - 14 Audio "DJ" CD Player
Audio "DJ" CD Player
The built-in standalone audio CD player gives you direct hardware control
for audio CDs/DVDs when the computer is shut down, but has a working
power source.
1. Make sure that the computer is shut down (i.e. the operating system
is not running) but you have a working power source (either battery
or AC Power).
2. Press the Audio DJ power button.
3. Press the open button on your CD/DVD device (or press the stop but-
ton
twice) and carefully place an audio CD onto the disc tray with
7
label-side facing up (DVD drives will also play audio CDs).
4. Gently push the CD/DVD tray in until its lock "clicks" and you are
ready to start.
5. The Audio Format Indicator will flash while data is being accessed
and will then display the audio format of the CD/DVD (CD or MP3).
6. The LCD will display the number of tracks.
7. Click the play/pause button to start the CD/DVD.
8. You can control the CD/DVD tracking and volume from the control
panel.
9. Use the stop button to stop the disc, or press it twice to eject the disk.
10. The player can be turned off by pressing the power button again.
Need help?
Do you have a question about the D900T PHANTOM and is the answer not in the manual?
Questions and answers