Upgrading The System Memory (Ram) - EUROCOM D900T PHANTOM User Manual

Upgrading the System Memory (RAM)

The computer has four memory sockets for 200 pin Small Outline Dual In-
line (SO-DIMM) - DDR-II (DDR2) - type memory modules (see
on page B - 2). The total memory size is automatically detected by the POST
routine once you turn on your computer.
1. Turn off the computer, and turn it over and remove the battery.
2. Locate the memory (RAM) bay cover and remove screws
carefully (the fan cable will still be attached) lift off the bay cover
1
4
2
3
Upgrading the System Memory (RAM) 7 - 7
Upgrading The Computer
"Memory"
Contact Warning
Be careful not to touch
the metal pins on the
module's
edge. Even the clean-
-
, and
1 4
est hands have oils
.
5
which can attract parti-
cles, and degrade the
module's
mance.
5
connecting
perfor-
Figure 7 - 4
RAM Cover
Removal
7