Display - EUROCOM D900T PHANTOM User Manual

Display

Problem
Nothing appears on
screen.
No image appears on the
external monitor I have
plugged in and powered
on.
The system is in a power saving mode. Toggle the sleep/resume key combination, Fn + F4
(see "Sleep Button" on page 4 -
\
The screen controls need to be adjusted. Toggle the screen control key combinations Fn +
F8/F9 (see "Opening the LCD" on page 3 -
make sure it's plugged in and turned on. You should also check the monitor's own
brightness and contrast controls.
The computer is set for a different display. Toggle the screen display key combination, Fn
+ F7 (see "Keyboard Video Controls" on page 3 -
connected, turn it on.
The screen saver is activated. Press any key or touch the TouchPad.
You haven't installed the video driver and configured it appropriately from the Control
Panel. See "What to Install" on page 5 - 1
see "NVIDIA Video Driver Controls" on page 3 - 3
video driver.
Possible Cause - Solution
8).
2). If you're connected to an external monitor,
for instructions on installing the driver, and
for instructions on configuring the
Troubleshooting
2). If an external monitor is
Display 9 - 9
9