Basic Hints And Tips - EUROCOM D900T PHANTOM User Manual

Table of Contents

Advertisement

Troubleshooting

Basic Hints and Tips

Many of the following may seem obvious but they are often the solution to a problem when your computer
appears not to be working.
• Power - Is the computer actually plugged into a working electrical outlet? If plugged into a
power strip, make sure it is actually working. Check the LED Power Indicators (see
Indicators" on page 1 -
• Connections - Check all the cables to make sure that there are no loose connections anywhere.
• Power Savings - Make sure that the system is not in Hibernate or Standby mode by pressing the
keys configured in your Power Management/Power Options (see
ton" on page 4 -
• Brightness - Check the brightness of the screen by pressing the Fn + F8 and F9 keys to adjust
the brightness (see
9
• Display Choice - Press Fn + F7 to make sure the system is not set to "external only" display (see
"Keyboard Video Controls" on page 3 -
• Boot Drive - Make sure there are no floppy disks in any connected drive when you start up your
machine (this is a common cause of the message "Invalid system disk - Replace the disk, and
then press any key" / "Remove disks or other media. Press any key to restart").
9 - 2 Basic Hints and Tips
6) to see the computer's power status.
8), the Fn + Esc key combination, or power button to wake-up the system.
"Keyboard Video Controls" on page 3 -
2).
2).
"LED
"Configuring the Power But-

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the D900T PHANTOM and is the answer not in the manual?

Questions and answers

Table of Contents