Configuring The Power Button - EUROCOM D470K PYTHON User Manual

Configuring the Power Button

The power button may be set to send the computer in to either Standby or Hi-
bernate mode. In Standby mode, the LED
bernate mode the LED will be off. If you are in a power saving mode set to
save power through individual components (e.g. hard disk, monitor), the LED
will remain green.
Power Button
You may also configure the Sleep/Resume key combination (Fn + F4) from the
menu illustrated in Figure 3 -
will flash green, and in Hi-
Lid Sleep/Resume (Sleep) Button
Sleep Button
15. In Windows this is referred to as the Sleep button.
Advanced Controls
Figure 3 - 15
Power Options
(Advanced - Power
Buttons)
Power Schemes 3 - 21
3