Infrared Controller (Winxp); Hot-Key (Winxp) - EUROCOM D470K PYTHON User Manual

Drivers & Utilities

Infrared Controller (WinXP)

1. If you can see the My Computer icon on your
desktop (if you cannot see the My Computer
icon go to step 2) click on it once to select it,
then right-click it to make the sub-menu appear
4 and scroll down to Properties and click on it
(go to step 3).
2. If you cannot see the My Computer icon click
Start (menu), then point to (but don't click just
highlight it) My Computer. Right-click it to
make the sub-menu appear and scroll down to
Properties and click on it (go to step 3).
3. Click the Hardware (tab), then click Device
Manager (button).
4. Click "+" next to Other devices (if its sub-
items are not shown).
5. Double-click Unknown device and click
Driver (tab).
6. Click Update Driver (button).
7. When the Hardware Update Wizard appears,
click "Install from a list or specific location
(Advanced)" then click Next.
8. Select "Search for the best driver in these
locations." and select ONLY "Include this
location in the search:".
4 - 14 Windows XP
9. Navigate (Browse...) to D:\Drivers\FIR and
click OK > Next.
10.Click Finish and close the open windows.
11.To configure the FIR settings see
the Infrared Settings for FIR" on page 3 -

Hot-Key (WinXP)

1. Click Start (menu) > Run ...
2. Navigate (Browse...) to
D:\Drivers\Hotkey\Setup.exe and click OK.
3. Choose the language you prefer, and click OK.
4. Click Next.
5. Click Finish to restart the computer.
6. You may then configure your Hot-Key buttons
as outlined in "Hot-Keys" on page 2 -
"Configuring
25.
16.