Display Devices; Switching/Enabling Displays (Keyboard) - EUROCOM D470K PYTHON User Manual

Advanced Controls
3
Figure 3 - 6
Rear View
Using the Driver to
Switch Displays
If you only use the key-
board toggle to switch
through the display op-
tions you will not have
all the configuration
options available to
you. If you want to ac-
cess the options listed
in "ATI Mobility Rade-
on 9700 Properties
Tabs" on page 3 - 6
use the driver control
panel to configure the
settings.

3 - 8 Display Devices

Display Devices
Besides the built-in LCD, you can also use an external VGA monitor or TV/
HDTV as your display device. A VGA monitor connects to the external mon-
itor (VGA) port a TV/HDTV (HDTV's require an HDTV converter) to the
,
1
S-Video Out port .
2

Switching/Enabling Displays (Keyboard)

You can switch display devices with the Fn + Display (F7) toggle. With the
video driver installed, you also can use its built-in controls to switch the dis-
play options. If you haven't installed the video driver, refer to (see
Install" on page 4 - 1) for setup instructions. To switch the display options:
1. Plug the VGA monitor or TV into the appropriate port.
2. Press and hold the Fn key, while simultaneously pressing the F7 key.
3. You may toggle through the options to display the notebook's LCD only, the
external display alone and the LCD and the external display together (make
sure you allow time for the screens to refresh as you toggle through).
1 2
"What to