Infrared Controller (Win2000); Hot-Key (Win2000); Modem (Win2000); Hot-Key - EUROCOM D470K PYTHON User Manual

Drivers & Utilities

Infrared Controller (Win2000)

1. Click Start (menu), point to Settings and click
Control Panel. Double-click System (icon)
and then click Hardware (tab) > Device Man-
ager (button).
4 2. Click Device Manager (tab), then click "+"
next to Other devices (if its sub-items are not
shown).
3. Double-click Unknown device, and click
Driver (tab).
4. Click Update Driver (button) > Next.
5. When the Upgrade Device Driver Wizard
appears, click Next (make sure that you have
selected "Search for a suitable driver for my
device (recommended)") and click Next.
6. When Locate Driver Files appears, select
ONLY "Specify a location" and click Next.
7. Navigate (Browse...) to D:\Drivers\FIR and
click Open > OK > Next.
8. Click Finish and close the open windows.
9. To configure the FIR settings see
the Infrared Settings for FIR" on page 3 -
4 - 8 Windows 2000 Professional

Hot-Key (Win2000)

1. Click Start (menu) > Run ...
2. Navigate (Browse...) to
D:\Drivers\Hotkey\Setup.exe and click OK.
3. Choose the language you prefer, and click OK.
4. Click Next.
5. Click Finish to restart the computer.
6. You may then configure your Hot-Key buttons
as outlined in

Modem (Win2000)

1. Click Start (menu) > Run ...
2. Navigate (Browse...) to
D:\Drivers\Modem\Setup.exe and click OK.
3. Click
4. Click
5. The modem is ready for dial-up configuration.
"Configuring
25.
You can change the modem country selection in the
control panel (Control Panel > Phone and Modem
Options (icon) and select a Country).
"Hot-Keys" on page 2 -
(button).
.
Modem Country Selection
16.