Administrator Screen Messages; C.1.1 - Fujitsu fi-6000NS Operator's Manual

C.1.1 Administrator Screen Messages
Screen
Login Login failed. Check the user name and
password, and try again.
Login not possible. Another user is
already logged in.
Logout Do you wish to logout now? (Logout/
Cancel)
A restart is required to effect the
changed settings. Do you wish to
restart now or later?
Restart: Restart the system
immediately. Web-login will not be
possible until the restart completes.
Cancel: Cancel the logout.
Scanner Name Scanner name contains invalid
characters.
Scanner name has not been entered.
Specified scanner name is already
being used.
Message
Network Scanner fi-6000NS Operator's Guide
Action
Re-enter the user name and
password.
If you forget your password,
contact your FUJITSU scanner
dealer or an authorized FUJITSU
scanner service provider.
Only one administrator or user can
login to the scanner at any one
time. After the other user
(administrator or regular) has
logged out, try again.
Press the [Logout] button to exit
the current session now.
Otherwise, press the [Cancel]
button to continue.
Press the [Restart] button to restart
the system now.
Otherwise, press the [Cancel]
button to continue the current
session.
Re-enter the scanner name using
only specified valid characters.
Do not enter a blank space before
or after the scanner name. Do not
use control characters or any of the
following symbols:
"/\ [ ] : | < > + = ; , ?
Enter a scanner name.
Enter a different scanner name.
C
271