EPSON EPL-N1600
4.3.45 Fan IOT
1. Remove the Cover Side,E. (Section 4.2.1)
2. Remove the Control Assembly Panel (E). (Section 4.2.3)
3. Remove the Cover Assembly MBF.E.(Section 4.2.4)
4. Remove the Tray Assembly MBF.E.(Section 4.2.5)
5. Remove the Cover Assembly,E. (Section 4.3)
6. Disconnect J222 from the HPS.
7. Remove the two screws that secure the Fan IOT to the Frame.
8. Pull the Fan straight out and remove it from the Frame.
Rev. A
Chapter 4
Disassembly and Assembly
Figure 4-51. "Fan IOT" Removal
4-154