Roll Assembly Turn - Epson EPL-N1600 Service Manual

EPSON EPL-N1600

4.3.9 Roll Assembly Turn

1. Remove the Cover Side,E. (Section 4.2.1)
2. Remove the Control Assembly Panel (E). (Section 4.2.3)
3. Remove the Cover Assembly MBF.E.(Section 4.2.4)
4. Remove the Tray Assembly MBF.E.(Section 4.2.5)
5. Remove the Cover Assembly,E. (Section 4.3)
6. Set the Printer Frame on its rear surface.
7. Press the Bearing Turn to the right while prying up the latch by the
tip of a small screwdriver.
8. Press the latch on the shaft, and slide the Roll Assembly Turn off of
the shaft.
Rev. A
Chapter 4 Disassembly and Assembly
Figure 4-15. "Roll Assembly Turn" Removal
4-118