Roll Assembly Exit Out - Epson EPL-N1600 Service Manual

EPSON EPL-N1600

4.3.27 Roll Assembly Exit Out

1. Remove the Cover Side,E. (Section 4.2.1)
2. Remove the Control Assembly Panel (E). (Section 4.2.3)
3. Remove the Cover Assembly MBF.E.(Section 4.2.4)
4. Remove the Tray Assembly MBF.E.(Section 4.2.5)
5. Remove the Cover Assembly,E. (Section 4.3)
6. Release the latch on the Bearing-Exit Roll SP (PL5.1.5: right
bearing) and slide the Bearing off of the shaft.
7. Release the latch on the Gear Exit Out, and slide the Roll Assembly
Exit Out to the right to get the left end of the shaft out of the Bearing-
Exit Roll (PL5.1.6: left bearing).
8. Remove the Roll Assembly Exit Out out of the left bearing hole.
9. Remove the Roll Assembly Exit Out and the Bearing-Exit Roll.
Rev. A
Chapter 4
Figure 4-33. "Roll Assembly Exit Out" Removal
Disassembly and Assembly
4-136