Gear Assembly Mbf - Epson EPL-N1600 Service Manual

EPSON EPL-N1600

4.3.23 Gear Assembly MBF

1. Remove the Cover Side,E. (Section 4.2.1)
2. Remove the Control Assembly Panel (E). (Section 4.2.3)
3. Remove the Cover Assembly MBF.E.(Section 4.2.4)
4. Remove the Tray Assembly MBF.E.(Section 4.2.5)
5. Remove the Cover Assembly,E. (Section 4.3)
6. Remove the Lever Jam Clear, Spring-Hold Rod, Stopper Rod, and
Spring Nip Pre-Registration (steps 6 and 7 of RRP 4.1.1).
7. Remove the Frame Assembly MBF.(Section 4.3.19)
8. Remove the Roll Assembly MBF.(Section 4.3.21)
9. Remove the Holder Gear MBF. (Section 4.3.22)
10. Pull up on the Cam MBF latch while you slide the Cam MBF off of
the shaft of the Gear Assembly MBF (1).
11. Push the Lever Gear out of the way (2) and slide the Gear Assembly
MBF out of the bearing hole (3).
12. Remove the Bearing MBF from the bearing hole.
Rev. A
Chapter 4 Disassembly and Assembly
Figure 4-29. "Gear Assembly MBF" Removal
4-132