EPSON EPL-N1600
4.3.21 Roll Assembly MBF
1. Remove the Cover Side,E. (Section 4.2.1)
2. Remove the Control Assembly Panel (E). (Section 4.2.3)
3. Remove the Cover Assembly MBF.E.(Section 4.2.4)
4. Remove the Tray Assembly MBF.E.(Section 4.2.5)
5. Remove the Cover Assembly,E. (Section 4.3)
6. Remove the Lever Jam Clear, Spring-Hold Rod, Stopper Rod, and
Spring Nip Pre-Registration (steps 6 and 7 of RRP 4.1.1).
7. Remove the Frame Assembly MBF.(Section 4.3.19)
8. Pull up the Roll latch and slide the Roll Assembly MBF off of the
shaft.
Rev. A
Chapter 4
Disassembly and Assembly
Figure 4-27. "Roll Assembly MBF" Removal
4-130