Wide Seam Width - Duerkopp Adler 579 Service Instructions Manual

12.2 Wide Seam Width

20
1
2
3
4
5
Caution Risk of Injury!
Set the stitch pattern only in the "Safe Stop" position or with the
machine turned off.
Rule and Control
Turn the handwheel so that two screws are visible on the cam.
–
Loosen screws 4 and 5 by one to two turns.
Turn the handwheel so that three screws are visible on the cam.
–
Screw screws 1 and 2 in as far as possible.
Tighten screws 4 and 5.
–
At the display of the main menu, press the "F" key.
–
With the arrow keys, set code "25483" .
–
Select the menu items "Configuration", "Machine" and "Covering
–
Stitch" in this order and confirm with the OK key.
There must be a "B" for wide behind the menu item. If there is
–
instead a "S" for narrow, change the setting with the arrow keys
and confirm with the OK key.
Exit the service menu by repeated pressing of the "ESC"key.
–
ATTENTION !
After the change of the seam width, the looping stroke (see Chapter
Looping Stroke) must be set anew.