Setting The The Function Of The Hand Switch - Duerkopp Adler 579 Service Instructions Manual

33.7 Setting the Function of the Hand Switch
58
The method of operation of the hand switch can be changed.
1st Setting (Hand switch: 0 in the menu)
Key 1: Clamps are opened or closed.
–
Key 2: The sewing cyle starts when the clamps are closed.
–
2nd Setting (Hand switch: 1 in the menu)
Key 1: Clamps are opened or closed.
–
If they are not already lowered, the clamps are lowered. The
–
sewing cycle starts.
Changing the function
When you are in the service menu, sequentially select the following
–
menu items with the arrow keys and the "OK" key:
- Configuration
- Operation
The " Operation " menu appears.
Select the menu item " Hand switch " with the arrow keys.
–
Press the "OK" key.
–
Change the value with the arrow keys and confirm with the "OK"
–
key.