Setting The Language Of The Menus; Setting The Sewing Mode - Duerkopp Adler 579 Service Instructions Manual

33.5 Setting the Language of the Menus

33.6 Setting the Sewing Modus
When you are in the service menu, sequentially select the following
–
menu items with the arrow keys and the "OK" key:
- Configuration
- Operation
- Languages
The language selection menu appears.
A check mark appears behind the currently selected language.
Select the desired language with the arrow keys.
–
Press the "OK" key.
–
The language is changed immediately.
The sewing modus must be setup. Please check chapter 9.4.2 in the
instruction manual.
Setting:
1. Sewing Modus S: Sequence mode can be selected.
2. Sewing Modus B: Single-buttonhole mode can be selected.
Shifting function
When you are in the service menu, sequentially select the following
–
menu items with the arrow keys and the "OK" key:
- Configuration
- Operation
The "Operation" menu appears.
Select the menu item "Sewing Modus" using the arrow keys.
–
Change the setting value with the arrow keys and confirm it with
–
the "OK" key.
3
57