Step Motor Test - Duerkopp Adler 579 Service Instructions Manual

33.20 Step Motor Test

The step motors for the three motion axes of the 579 can be tested in
this menu.
When you are in the service menu, sequentially select the following
menu items with the arrow keys and the "OK" key:
- Test Functions
- Multitest
- Step Motor Test
The " Step Motor Test " menu appears.
Select the desired axis with the arrow keys.
–
Press the "OK" key.
–
If the step motor for the lateral or rotational axis is selected, move
–
the motor with the arrow-left and -right keys.
If the step motor for the longitudinal axis is selected, move the
–
motor with the arrow-up and -down keys.
After the pressing of the key the step motor moves 5 steps.
–
If one presses the"ESC" key, the test of the current step motor is
–
ended.
Select another step motor or exit the step motor test by pressing on
–
the "ESC" key.
3
73