Duerkopp Adler 579 Service Instructions Manual page 10

10
1
2
3
Correction
Turn the machine on, the machine runs into the sewing position.
–
Turn the Safe Stop on.
–
Loosen the screws on the switching segment 3.
–
Turn switching segment 3 in the direction of rotation so that the
–
switch 2 receives contact.
Turn switching segment 3 back so far that the switch 2 is
–
deactivated again.
Tighten the screws on the switching segment 3.
–
Correction of the clearance of the proximity switch to the disc
Loosen nut 1.
–
Screw proximity switch 2 out or in.
–
Tighten nut 1.
–