33.8 Setting the Knife Position
33.9 Setting the Covering Stitch
The position of the knife can be corrected in this menu. The position of
the knife can be corrected by +-0,3 mm on both axes. Which direction
is meant by "+" and "-" is shown in the symbol at the lower left in the
display.
When you are in the service menu, sequentially select the following
–
menu items with the arrow keys and the "OK" key:
- Configuration
- Machine
- Cutter position
The " Setting the Cutter Position " menu appears.
Select the axis on which the knife is to be moved with the arrow
–
keys.
Press the "OK" key.
–
Change the correction value with the arrow keys.
–
Press the "OK" key.
–
The covering stitch can be changed between wide and narrow in this
menu.
Wide covering stitch:
Narrow covering stitch: "S" in the display.
When you are in the service menu, sequentially select the following
–
menu items with the arrow keys and the "OK" key:
- Configuration
- Machine
- Covering Stitch
The " Covering Stitch " menu appears.
Press the "OK" key.
–
Change the setting for covering stitch with the arrow keys.
–
Press the "OK" key.
–
"B" in the display.
3
59