User Interface; Structure Of Menu - Duerkopp Adler 910 Operating Instructions Manual

8.2

User interface

8.2.1

Structure of menu

ESC-key
Storage level
Dongle
20
Switch on
the main switch
Sewing mode
Key P
ESC-
key
Program selection
sequence selection
Calling up the service menu
–
Switch the main switch on.
The control is initialized.
–
Step the pedal back to reach the initial position of the sewing unit.
–
Press the function key "F".
The display changes over to the Multitest menu.
Calling up the technician mode
–
Switch the main switch on.
The control is initialized.
–
Step the pedal back to reach the initial position of the sewing unit.
–
Press key " F " .
The display changes over to the Multitest menu.
–
Press key " F " .
–
EnterCode 1 (see chapter 9).
–
Press the " OK" key.
The display changes over to the technician mode.
Key F
Key S
or
Multitest
Menu
Key F
Technician mode