Ram Card Removal - HP Model 745 - VME Workstation Owner's Manual

Figure 4-2
thumbs until the RAM cards are about 1/3 seated.
7 After the connectors are 1/3 seated, continue to push evenly with your
thumbs, while pushing harder. The connectors will fully snap together.
8 Examine the connector seating from both sides of the RAM card to ensure
there are no gaps between the RAM card connectors and the connectors
underneath it.
9 Secure the topmost card with the screws you removed in Step 2.

RAM Card Removal

When removing RAM cards from the Model 744 CPU or the RAM card
stack, remove the cards one at a time. Carefully lift the card by the edge near
the connectors. Do not try to pry the card up with a tool.
Installing RAM Cards
Processor Options Installation
Memory
4-7