HP Model 745 - VME Workstation Owner's Manual page 194

B-14
The Boot Console Interface
Displaying and Setting Paths
To display the current setting for a particular system path, follow the direc-
tions in "Accessing the Boot Console Interface" earlier in this chapter, and
then type the following at the prompt:
Main Menu: Enter command > path path_type
where path_type is one of the path types listed in Table B-1.
For example, to get the path to the primary boot device, follow the directions
in "Accessing the Boot Console Interface" earlier in this chapter, and then
type the following at the prompt:
Main Menu: Enter command > path primary
To set a system path to a new value, follow the directions in "Accessing the
Boot Console Interface" earlier in this chapter, and then type the following
at the prompt:
Main Menu: Enter command > path path_type path
where path_type is one of the path types listed in Table B-1 and path is the
specification of the path in Mnemonic Style Notation (as described in Table
B-2). For example, to set the primary boot path to a SCSI disk with an ID of
6.0, follow the directions in "Accessing the Boot Console Interface" earlier
in this chapter, and then type the following at the prompt:
Main Menu: Enter command > path pri sescsi.6.0