Removing And Replacing Ram Cards; Preliminary Requirements; Removal; Ram Card Fasteners - HP Model 745 - VME Workstation Handbook
Hp model 745 service handbook
Hide thumbs
Also See for Model 745 - VME Workstation:
- Owner's manual (220 pages) ,
- Installation (4 pages) ,
- Declaration of conformity (2 pages)
Table of Contents
Advertisement
Removing and Replacing RAM Cards
This section provides step-by-step instructions for removing RAM cards from your
Model 744.
Preliminary Requirements
Before you remove a RAM card:
Remove the Model 744 from its card cage. (See Removing and Replacing the Model 744
Board Computer, earlier in this chapter.)
Removal
Follow these steps to remove RAM cards:
1
Remove the retaining screws from the uppermost RAM card, as shown in Figure 5-5.
Retaining
Screws
Figure 5-5
Field Replaceable Units
Removing and Replacing RAM Cards
Standoffs
RAM Card Fasteners
5-12
Spacers
Advertisement
Table of Contents
