Determining the Faulty RAM Card
If a memory failure is detected during memtest execution, the failing memory card is indi-
cated.
The following lists shows the location of the RAM stacks:
•
RAM stack 1 is located behind the two PS/2 connectors on the board computer's
right side.
•
RAM stack 2 is on the other side behind the LEDs and Audio port.
•
The low-number slot position is next to the system board.
•
Note that a maximum of three RAM cards are supported in RAM stack 1 and only
one RAM card is supported in RAM stack two.
Table 4-3 lists each RAM card location in each of the two RAM stacks.
Table 4-3
Determining the Faulty RAM Card
RAM Stack Cards
Physical Slot
Number
RAM Stack 2
7
6
5
4
RAM Stack 1
3
2
1
0
Supported?
No
No
No
Yes
No
Yes
Yes
Yes
Troubleshooting
4-15