PCI Card Installation
Hardware Installation
Hardware Installation
Tools Required
You'll need the following items to access the PCI cards in the Model 745
• No. 1 Posidriv screwdiver
• T-10 or T-15 Torx screwdriver
• Static-free work area.
NOTE:
This PCI backplane only supports option cards with +5 Vdc bus signalling.
Procedure
1 Stop any application programs, and then shut down your industrial con-
troller.
2 Turn the industrial controller off, and unplug the power cord.
3 If the system is rack mounted, remove from the rack.
6-3