HP Model 745 - VME Workstation Owner's Manual page 203

The following listing is a sample memory configuration table when memory
modules are properly installed and configured:
MEMORY INFORMATION
MEMORY STATUS TABLE
Slot Size
----------------
0 64MB
1 32MB
2 64MB
---------
TOTAL 160MB
If the power-on selftest detects a defective or damaged memory card, using
the memory command (from the Information Menu prompt) displays the
following information:
WARNING: One or more memory banks were not configured due
to errors in the following SIMM(s).
Physical Slot Error Type
------------- -----------
3 SIMM hardware error
Memory Card Stack
+-------------------------+
Slot 3 | Failed
+-------------------------+
+-------------------------+
Slot 2 | 64MB OK
+-------------------------+
+-------------------------+
Slot 1 | 32MB OK
+-------------------------+
+-------------------------+
Slot 0 | 64MB OK
+-------------------------+
==========================================================
Side view of Model 9000/744 Single Board Computer PCB.
SUGGESTION: If possible, turn off the computer and check to
see if the memory card(s) are seated properly.
Memory
HVERSION
---------------
0x0740
Displaying the Current Memory Configuration
Status
Configured
Configured
Configured
|
|
|
|
SVERSION
---------------
0x0900
The Boot Console Interface
B-23