Installing The Pmc Bridge Adapter Onto The Board Computer - HP Model 745 - VME Workstation Owner's Manual

PMC Bridge Adapter
with 2 PMC Cards Installed
Tabs (4)
Front Bezel Screws (4)
Figure 4-7
Figure 4-8
10 Remove the EMI gaskets from the bezel of the board computer, if in-
stalled.
11 Now install the PMC bridge adapter (as shown in Figure 4-7) or the bridge
adapter with expansion adapter (as shown in Figure 4-8) onto the board
computer. Align the GSC connector first, then the tabs on the front panel,
and push the boards together. There are four screws that secure the front
bezel, and four screws that secure the backplane connectors.

Installing the PMC Bridge Adapter onto the Board Computer

Installing the Bridge Adapter with the Expansion Adapter onto the
Board Computer
Processor Options Installation
PMC Bridge Adapter and Expansion Adapter
GSC Connector
Connector
Screws (4)
4-13