HP Model 745 - VME Workstation Owner's Manual page 11

Contents
Removing the top cover 5-5
Blank Slot Plate and Screw 5-6
Installing the EISA card and screw 5-6
Removing the top cover 6-4
Blank Slot Plate and Screw 6-5
Installing the PCI card and screw 6-6
Mass Storage Module: Typical Device Positions 7-4
Removing Retainer Bracket 7-6
Device Installation in the Disk Carrier 7-9
Installing the 3.5-inch adapter brackets 7-10
3.5-Inch Hard Disk Installation with Filler Panel 7-11
Disk Carrier and Filler Panels 7-12
Installing the Disk Carriers 7-13
Replacing Retainer Bracket 7-14
CD-ROM Drive Controls and Features 8-3
CD-ROM Disc Tray 8-6
Placing a CD-ROM Disc in a Drive 8-7
Removing a CD-ROM Disc From a Drive 8-8
Tape Drive Controls and Indicators 8-17
Tape Drive LED Display Codes 8-17
Setting the Write-Protect Tab on a DDS Tape 8-21
Loading and Unloading a Data Cassette 8-22
Setting the Write-Protect Tab on a Floppy Diskette 8-28
Inserting and Removing a Floppy Diskette 8-29
Model 745 LED Location 9-3
ix