CAUTION:
On-Board Video
Connector
Note: On-board connector requires conversion cable.
Figure 2-2
Some CRT-based monitors are heavy. Use caution when lifting and
unpacking the monitor.
Connecting a Monitor
1 Plug the small connector of the conversion video cable (bundled with the
Model 745) into the video connector of your board computer.
2 Connect the monitor cable (comes with the monitor) to the conversion ca-
ble.
3 Connect the monitor cable to your monitor.
Monitor Power Cord
If your monitor has an attached power cord, connect the plug to a power
source. If your monitor has a separate cord, connect the cord to the monitor,
then connect the plug to a power source.
Connecting a Monitor or Text-Only Terminal
Connecting Cables
2-5