HP Model 745 - VME Workstation Owner's Manual page 201

NOTE:
If no keyboards are found the following message is displayed:
WARNING: No keyboard(s) found. Turn off system
power, check keyboard connection(s) and
repeat interactive console search.
To advance all graphics adapter monitors to the next resolution, press the <Tab>
key one time and wait five seconds for all monitor types to change. Do not hold
down the <Tab> key or press it multiple times as this will cause the monitor
types to advance for each press of the <Tab> key.
4 When the following message is displayed, press the <Esc> key to confirm
selection of the device as the console:
Press the <Esc> key to confirm selection of GRAPHICS(s) as the CONSOLE.
This selection will timeout in 10 seconds if not confirmed.
The message is displayed for only ten seconds before console search is
resumed. Press <Esc> as soon as possible after the message is displayed.
The following message is displayed on the selected display:
GRAPHICS(s) MONITOR INFORMATION
Slot Model Type Resolution Freq Class
---- ----------------- ---- ---------- ---- -----
0 INTERNAL_EG_1280
Selected CONSOLE path is: GRAPHICS(s)
Selected KEYBOARD path is: PS2
The Boot Console Interface
Displaying and Setting the Monitor Type
12 1280x1024 75Hz
B-21