Configuring The Floppy Driver - HP Model 745 - VME Workstation Owner's Manual

8-34
Using Mass Storage Devices
Operating the Floppy Drive
man cpio Enter
For more information on copying to or from DOS files, refer to the man page
by typing the following in a terminal window:
man doscp
For more information on listing the contents of DOS directories, refer to the
dosls man page by typing the following in a terminal window:
man dosls Enter
For more information on using your floppy disk drive and floppy diskettes,
refer to the floppy man page by typing the following in a terminal window:
man floppy Enter
For more information on using the mediainit command, refer to the medi-
ainit man page by typing the following in a terminal window:
man mediainit Enter

Configuring the Floppy Driver

If you reload software or rebuild the Instant Ignition system on your work-
station, you need to reconfigure the HP-UX Kernel to add the floppy driver.
Use the SAM utility to add the flexible disk driver and build a new HP-UX
kernel.
For more information about how to reconfigure the kernel using SAM, see
the following manuals:
• System Administration Tasks HP 9000 Series 700 Computers (B2355-
90040)
• Using HP-UX (B2910-90001)