Installing A Pmc Card Onto The Expansion Adapter - HP Model 745 - VME Workstation Owner's Manual
Model 745 industrial controller owner's guide
Hide thumbs
Also See for Model 745 - VME Workstation:
- Handbook (170 pages) ,
- Installation (4 pages) ,
- Declaration of conformity (2 pages)
Table of Contents
Advertisement
Bezel
blank
Figure 4-4
4-10
Processor Options Installation
PMC Bridge Adapter and Expansion Adapter
6 Install PMC card(s) onto the expansion adapter by aligning the front of the
card with the front bezel, and the rear of the card with the connectors and
keying pin. See Figure 4-4. There are four screws that secure the PMC
card from the bottom of the expansion adapter.
O-Ring Gasket
Site 4
Installing a PMC Card onto the Expansion Adapter
PMC Card
Site 3
Expansion Adapter
Advertisement
Table of Contents
