Installing The Pci Card And Screw - HP Model 745 - VME Workstation Owner's Manual

Model 745 industrial controller owner's guide
Hide thumbs Also See for Model 745 - VME Workstation:
Table of Contents

Advertisement

Figure 6-3
6-6
PCI Card Installation
Hardware Installation
6 Refer to your PCI card installation manual, and then set any configura-
tions that may be required for your application.
Install the PCI card in the slot. Make sure its connector is well seated in the
EISA backplane.

Installing the PCI card and screw

7 Secure the PCI card with the screw from the blank plate.
8 Replace the system's top cover.
9 If the system is to be rack mounted, mount it in the rack now.

Advertisement

Table of Contents
loading

This manual is also suitable for:

745

Table of Contents