Configuring the HP-UX Kernel
If you reinstall HP-UX after receiving your Model 745, you need to recon-
figure the HP-UX kernel for proper operation of the LED indicators and RS-
232 Port B.
To reconfigure the HP-UX kernel:
1 Login as root or superuser (su).
2 Start the System Administration Manager (SAM) either through an Appli-
cation Manager System_Admin toolbox or through the command line:
/usr/sbin/sam
3 When SAM starts, choose the Kernel Configuration icon.
4 From the Kernel Configuration window, choose Drivers.
5 Scroll down the list of drivers, and select vme2.
6 With vme2 highlighted, select Actions on the menu bar.
7 Select Add Driver to Kernel. The "Pending State" column now shows
vme2 as being "In".
8 Now select Actions again, and choose Create a New Kernel.
9 Follow all the prompts to allow a new kernel to be built and for the system
to be rebooted.
Configuring the HP-UX Kernel
Enter
Dealing With Problems
9-13