HP Model 745 - VME Workstation Owner's Manual page 83

16 Plug in the power cord, and then turn on the power for the chassis and boot
the operating system.
17 If your system does not already support PCI cards (through the PCI back-
plane or PMC bridge board), log in as root and use the SAM utility to con-
figure the HP-UX kernel for PCI support. (PMC cards require PCI drivers
in the kernel.)
18 When SAM has started, choose the Kernel Configuration -> menu.
19 From the Kernel Configuration menu, choose Drivers
20 From the Drivers menu, select GSCtoPCI Driver.
21 Go to the Actions menu and select Add Driver to Kernel.
22 Go to the Actions menu and select Create a New Kernel.
23 When the new kernel is built, SAM asks if you want to move the kernel
into place and reboot. Choose Yes.
The system reboots with the PCI driver loaded.
Processor Options Installation
PMC Bridge Adapter and Expansion Adapter
4-19