Hardware Installation For Drives; Supported Mass Storage Devices - HP Model 745 - VME Workstation Owner's Manual

Table 7-1

Hardware Installation for Drives

The following products are supported for mass storage in the Model 745.
The mass storage module can hold up to five drives. All mass storage
devices operate on the same single-ended narrow SCSI bus.
There are two locations for a 5.25-inch device (one front facing and one rear
facing) suitable for a removable media device or a fixed device. There are
also two locations for a 3.5-inch device (one front facing and one rear fac-
ing) suitable for a removable media device or a fixed device. In addition,
there is one location for a 3.5-inch fixed device. Included with the system
are adapter brackets that allow mounting 3.5-inch devices in the 5.25-inch
locations.

Supported Mass Storage Devices

3.5-inch, 4 GB Single-Ended Disk
3.5-inch, 1.4 MB flexible disk drive
3.5-inch, DDS Tape Drive
5.25-inch, CD-ROM Drive
Tools for Installation
Before you start to install a new drive, make sure you have the following
tools:
No. 1 Pozidriv screwdriver
T-10 or T-15 Torx driver
Static-free work area
Installing and Configuring Mass Storage Devices
Hardware Installation for Drives
Description
7-3