HP Model 745 - VME Workstation Owner's Manual page 73

Bezel
blank
NOTE:
O-Ring Gasket
Site 2
If you are installing only the bridge adapter, go on to step 10. If you are also
installing the expansion adapter, continue with step 4.
4 Refer to your PMC card installation manual, and set any configuration
switches or jumpers that may be required for your application.
5 On the PMC expansion adapter, remove the bezel blank(s) from the sites
where you will be installing the PMC card(s). See Figure 4-4.
When installing a PMC card, ensure that the O-ring type gasket near the bezel
remains in place.
Processor Options Installation
PMC Bridge Adapter and Expansion Adapter
Site 1
Bridge Adapter
PMC Card
4-9