Pick-Up/Feeding System - Canon GP335 Service Manual

Adjusting the Positioning the
Primary Charging Roller Cleaning
4
Solenoid
Make adjustments so that the length of the
primary charging roller solenoid (SL1)
indicated in the figure is 4.0 ±0.2 mm.
4.0±0.2mm
Figure 14-217
COPYRIGHT © 1999 CANON INC. CANON 405/335 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 14 TROUBLESHOOTING
D. Pick-Up/Feeding System
Adjusting the Positioning the
1
Multifeeder paper Guide Cam
Make adjustments so that the paper guide
plate cam is as shown when the solenoid plate
is in contact with the claw of the control ring.
Gear 1
Paper guide plate
Gear 2
Paper guide plate
Figure 14-218
Control ring
Screw w/ hex hole
Claw
Solenoid plate
14-15