Table of Contents
Advertisement
Making Copies
This section describes the basic procedure to perform standard copying.
1.
1.
Check that printer is turned on.
2.
2.
Load paper.
3.
3. Press the COPY button.
The Copy standby screen is displayed.
4.
4.
Load original on platen.
5. Confirm the page size (A) and magnification (B).
5.
Note
• To change or confirm the page size, magnification, or other settings, press the MENU button, then
•
use the
Setting Items for Copying
•
• Press the COPY button to reset the magnification to 100%.
6.
6. Use the
button to specify the number of copies.
7. Press the Black button or the Color button.
7.
The printer starts copying.
Remove the original on the platen after copying is complete.
Important
•
• Do not open the document cover or remove the original while Scanning... is displayed on the
screen.
Note
• To cancel copying, press the Stop button.
•
•
• You can add the copying job while printing.
Adding the Copying Job (Reserve copy)
button to display the desired setting item.
209
Advertisement
Table of Contents
