Table of Contents
Advertisement
Auto Answer-Intercom
DESCRIPTION
CONSIDERATIONS
RELATED FEATURES
How to Program
1 Label a button with lights.
2 Enter programming mode by sliding the T/P
switch to P. (Digital phones: Dial #33.)
3 Press the button you want to program.
4 Dial *70.
5 Program another feature, or leave
programming mode by sliding the T/P switch
to the center position. (Digital phones: Dial
#00.)
Auto Intercom
DESCRIPTION
CONSIDERATIONS
3-14 MERLIN II System Features
You may have an optional Hands-Free Unit connected to your phone. If you
want it to go on automatically when you receive intercom calls so that you
can answer them without lifting your handset, you need to program an Auto
Answer-Intercom button.
You should use the Auto Answer-Intercom feature instead of Auto
Answer-All to activate a Hands-Free Unit when intercom calls come in.
If you want an answering machine to answer intercom calls, use the Auto
Answer-All feature instead of Auto Answer-Intercom.
You can have both Auto Answer-All and Auto Answer-Intercom
programmed for your phone; however, the two features cannot be turned
on at your phone at the same time.
If you have a built-in speakerphone or Hands-Free Answer on Intercom,
you don't need to program the Auto Answer-Intercom feature.
Auto Answer-All
You can use an Auto Intercom button for one-touch dialing of intercom
numbers. Program any intercom number onto an Auto Intercom button and
use the button instead of dialing the intercom number.
You cannot have both an Auto Intercom button and a Manual Signaling
button for the same person. If you try to program both, you deactivate
the one that you programmed earlier.
If you program this feature onto a button with lights, the green light next
to the button goes on when the person at that intercom number uses the
phone or uses the Do Not Disturb feature. When the person calls you, the
light next to the person's Auto Intercom button flashes.
How to Use
To have your Hands-Free Unit go on
automatically for intercom calls:
1 Press Auto Answer-Intercom.
The green light next to the button goes on.
To stop the automatic answering:
1 Press Auto Answer-Intercom again.
The green light next to the button goes off.
Advertisement
Table of Contents
