Forced Account Code Entry - AT&T Merlin II Release 3 System Manual

To assign single numbers:
1 Enter administration mode by sliding the T/P switch to the center position.
Press Conference twice.
2
The administration menu appears.
3 Press
[FlexNum], [Single].
4 Press the appropriate button depending on whether you're renumbering
line pool, page group, or Call Distribution group.
5
Perform one of the following:
Enter the current number of the station, line, line pool, or group.
If you're renumbering a station or line, press the Auto Intercom button or the line
button.
Enter the new flexible number.
6
7 Press
[Enter].
The system returns you to the Single Renumbering screen.
8 Continue with Flexible Numbering or press Conference to return to the main
administration menu. You can also leave administration mode by sliding the T/P switch to
the center position.
To
print the current dial plan:
1
Enter administration mode by sliding the T/P switch to P.
Press Conference twice.
2
The administration menu appears.
3 Press
[More], [More], [Print], [DialPlan],
4 Press Conference to return to the main administration menu, or leave administration
mode by sliding the T/P switch to the center position.

Forced Account Code Entry

DESCRIPTION
How to Administer
If you assign the Forced Account Code Entry feature to a phone, the user
must enter an account code (1 to 16 digits) before placing an outside call.
This feature assures that all outgoing calls on selected phones are associated
with the appropriate account for billing or other purposes.
MERLIN II system phone users program an Account Code Entry button to
use when entering account numbers for outside calls. For convenience, they
can program frequently used account codes onto available buttons or assign
Personal Speed Dial codes to account numbers.
a line, station,
MERLIN II System Features 3-61