AT&T Merlin II Release 3 System Manual page 145

RELATED FEATURES
How to Program
To enable or disable Ringing/Idle Line
Preference:
1 Enter programming mode by sliding the T/P
switch to P. (Digital phones: Dial #33.)
2 Press a line button.
3 Take the appropriate action:
Dial *343 to enable Ringing/Idle Line
Preference.
Dial *344 to disable Ringing/Idle Line
Preference.
4 Leave programming mode by sliding the T/P
switch to the center position. (Digital phones:
Dial #00.)
Ringing-on-Transfer
DESCRIPTION
1 Enter administration mode by sliding the T/P switch to P.
2 Press Conference twice.
The administration menu appears.
3 Press
[More], [Options], [More], [Feedback].
4 Press
[Music]
5 Press Conference to return to the main administration menu, or leave administration
mode by sliding the T/P switch to the center position.
3-116 MERLIN II System Features
Automatic Line Selection
Ringing Options
When someone within the MERLIN II system transfers a call, the person is
automatically connected to Music-on-Hold, if the system is using that feature.
However, you may choose to administer the Ringing-on-Transfer feature so
that the caller hears ringing instead. The system is factory-set to connect a
person to Music-on-Hold when the person's call is transferred.
How to Administer
or
[Ringback].
How to Use
When you receive an outside call:
1 Lift your handset or press Speakerphone.
If you have Ringing/Idle Line Preference, the MERLIN II
system connects you to the ringing line.
If you have disabled this feature:
1 Press the line button for the incoming call.