Intercom (Automatic/Dial); Last Number Dialed - AT&T DEFINITY User Manual

Intercom (Automatic/Dial)

To make a call to your
predetermined Automatic
Intercom partner
To dial a call to a
member of your Dial
Intercom group
To answer any intercom
call

Last Number Dialed

To automatically redial
the last number you
dialed (extension, outside
number, or trunk/feature
access code)
To see the number you
last dialed (you must be
on-hook)
1 While off-hook, press [
Intercom ring is sent
While off-hook, press [
1
2 Dial group member's 1- or 2-digit code
Intercom ring is sent
Pick up handset and press [
1
You are connected to call
Note: If you are active on another call, first press
[ ] , then press flashing [
Hold
1 While off-hook, press [
or Dial Last Number Dialed access code
(while off-hook)
Number is automatically dialed (up to 20 digits)
Note: Available with DEFINITY Generic 2 and
System 85 R2V4 and some R2V3 systems. Check
with your system manager to learn if the feature is
available on your system.
Limitations on this feature should be noted. Digits
dialed via Abbreviated Dialing, feature dial codes,
authorization codes, and Station Message Detail
Recording (SMDR) account codes are not retained in
memory and must be redialed for each call.
While on-hook, press [
1
Last number dialed is shown on the display
screen
]
Icom Auto xxx
[ringback tone]
[dial tone]
]
Icom Dial xxx
[ringback tone]
]
Icom
] .
Icom
]
Last Dialed
]
Last Dialed
27