Last Number Redial - AT&T Merlin II Release 3 System Manual

To assign labels to stations:
1 Enter administration mode
2 Press Conference twice.
The administration menu appears.
Press
3
[More], [More], [Label].
The system prompts you to designate the type of labels you are assigning.
Press
4
[Stations].
The system prompts you to enter the station number.
5 Dial the station (intercom) number.
6
Press
[Enter].
NOTE: To correct the entry, press backspace
7 Enter the label for the station. This can be up
letters, the numbers 0 through 9, and the ampersand (&), dash (-), space ( ), colon (:),
asterisk (*), and pound sign (#). Figure 3-1 under "Administration Overlay" at the
beginning of this section shows which buttons on the console represent letters and special
characters.
NOTE: Correct an entry by pressing backspace and then
8 Press
[Enter].
Repeat steps 5 through 8 to assign labels to the remaining stations.
9
10 Press Conference to return to the main administration menu or leave administration mode
by sliding the T/P switch to the center position.

Last Number Redial

DESCRIPTION
CONSIDERATIONS
How to Administer (Continued)
by sliding the T/P switch to P.
With a Last Number Redial button, you can redial with one touch the number
you dialed most recently. You do not need to do anything to save the
number.
The Last Number Redial button saves manually dialed outside telephone
numbers and numbers dialed with an Outside Auto Dial button.
If you try to program a second Last Number Redial button, the first one is
automatically removed.
then press
[Enter].
to seven characters, including all 26 capital
[Enter].
MERLIN II System Features 3-73