Transfer Return Interval - AT&T Merlin II Release 3 System Manual

How to Program
See previous page.

Transfer Return Interval

DESCRIPTION
1 Enter administration mode by sliding the T/P switch to P.
2 Press Conference twice.
The administration menu appears.
3 Press
[More], [Options], [TrfRet].
4 Press
[Backspace]
5 Dial number of rings (1 through 9) preferred before calls return to original phone. Dial 0 if
transferred calls should not return.
6 Press
[Enter].
7 Press Conference to return to the main administration menu, or leave administration mode by
sliding the T/P switch to the center position.
3-140 MERLIN II System Features
When someone is the MERLIN II system transfers a call and it is not answered,
the call return to the sender. The system is factory-set to return calls after four
rings. You can change the setting so that a call rings as many as nine times
before returning to the person who has transferred it. You can also choose to set
the system not to return transferred calls at all.
How to Administer
to erase the existing number of rings.
How to Use (Continued)
To transfer calls between single line phones:
1 Flash the switchhook, then dial the extension to
which you are transferring the call.
2 As soon as you hear ringing, hang up.
To announce a call using single line phones:
1 Flash the switchhook, then dial the extension to
which you are transferring the call.
2 Announce the call.
3 Then both you and the person to whom the call
will be transferred must hang up. The call will
then ring at the appropriate extension.