AT&T Merlin II Release 3 System Manual page 91

CONSIDERATIONS
RELATED FEATURES
1 Enter administration mode by sliding the T/P switch to P.
2 Press Conference twice.
The administration menu appears.
3 Press
[Stations], [More], [Account].
4 Press the Auto Intercom button of each phone to which you want to assign or remove this
feature until the light next to the button shows the appropriate code.
Green light on = phone has Forced Account Code Entry
Green light off = phone doesn't have Forced Account Code Entry
5 Press Conference to return to the main administration menu, or leave administration
mode by sliding the T/P switch to the center position.
3-62 MERLIN II System Features
Forced Account Code Entry applies only to outside calls that the user
originates. The user can answer outside calls, add outside lines to a
conference call that he or she has originated, bridge onto an in-progress
call, generate a switchhook flash, or select an alternate ARS routing
pattern without entering an account code.
People whose phones are administered for Forced Account Code Entry
can also use the standard Account Code Entry feature. The same
programmable button, the Account Code Entry button, is used for both
features.
The Forced Account Code Entry feature applies to outgoing calls only.
You use the standard Account Code Entry feature to associate an account
code with an incoming call.
Forced Account Code Entry can be administered for basic Touch-Tone
telephones in all systems except systems administered for behind-switch
operation. People who have basic telephones administered for Forced
Account Code Entry follow a different procedure for placing outside calls
than do people with MERLIN II system phones. The feature cannot be
used with rotary telephones.
Account Code Entry
How to Administer