Table of Contents
Advertisement
CONSIDERATIONS
1 Enter administration mode by sliding the T/P switch to P.
2 Press Conference twice.
The administration menu appears.
3 Press
[Lines], [More], [HldAband].
4 Press line buttons:
Steady green on = line drops held call on long (450 millisecond) signal (factory setting)
Green off = line drops held call on short (50 millisecond) signal
5 Press Conference to return to the main administration menu or leave administration mode
by sliding the T/P switch to the center position.
Incoming Line Identification
Intercom
DESCRIPTION
If your system has either of the following problems, change the Hold
Disconnect Interval.
If a caller waiting on hold is disconnected, the disconnect interval setting
of your MERLIN II system is shorter than the setting at your local
telephone company's central office.
If a caller waiting on hold hangs up, but the light next to that line button
on phones in your system continues to flash as if the call were still on
hold, the disconnect interval setting of your MERLIN II system is longer
than the setting at your local telephone company's central office.
How to Administer
See "Labels for Lines and Stations"
Each phone connected to the MERLIN II system has a unique intercom
number. You can dial intercom numbers to place calls to people connected to
the system.
On MERLIN II system phones you can place two types of intercom calls:
Ringing Intercom Calls. You can place ringing intercom calls when you
want to have two-way conversations with people connected to your
MERLIN II system. Your calls ring at their phones, and your co-workers
lift their handsets to hear you and to talk with you.
Announced Intercom Calls. When you place announced intercom calls,
your co-workers' phones beep and then they hear your voice through
their phone speakers.
MERLIN II System Features 3-69
Advertisement
Table of Contents
