AT&T Merlin II Release 3 System Manual page 162

To select the Dialing mode:
1 Enter administration mode by sliding the T/P switch to P.
2 Press Conference twice.
The administration menu appears.
3 Press
[More], [More], [ T i e L i n e s ] , [More], [InMode].
Press line button to select the dialing mode:
— Green light on = Touch-Tone selected
— Green light off = rotary selected (default)
Repeat step 3 for each tie line.
Perform the step 3 procedure again, except select
[InMode].
Repeat this procedure for each tie line port.
4 Press Conference to return to the main administration menu, or leave administration mode by
sliding the T/P switch to the center position.
To select the Dial Tone:
1 Enter administration mode by sliding the T/P switch to P.
2 Press Conference twice.
The administration menu appears.
3 Press
[More], [More], [More], [TieLines], [More], [DialTone].
Press line button to select the tie line dial tone:
— Green light on = remote (default)
— Green light off = local
4 Press Conference to return to the main administration menu, or leave administration mode by
sliding the T/P switch to the center position.
How to Administer (Continued)
[OutMode]
from the tie line menu instead of
MERLIN II System Features 3-133
(Continued)